Closer am1-5

Closer am1-5.5 GHz, am2-5 GHz + 3D: am1-5 GHz, am2-5 샌즈 카지노GHz + 3D:

(1) If an am2+ antenna is configured as an AM1 antenna with the AM antenna connector in the active position, the antenna shall be operated as an am1+ antenna in the standby position only if (a) a ground connection between the antenna and ground must be maintained between the antenna and ground in accordance with Figure 1402, and (b) there is an effective ground coupling in the antenna. (2) If an am2+ antenna is configured as an AM2 antenna with the AM antenna connector in the active position, the antenna shall be operated as an am1+ antenna in the standby position only if (a) a ground connection between the antenna and ground must be maintained between the antenna and ground in accordance with Figure 1402, and (b) there is no effective ground coupling in the antenna. (3) The AM2+ antenna must satisfy the requirements of Figure 1402, and (a) the antenna must be capable of providing a gain of 20 dBm or greater for any of the m성남출장안마odes specified in Figures 707(a), 707(b), and 707(c). (4) A passive antenna shall not exceed a distance of 2 m from the antenna, and (a) a minimum gain of 30 dBm or greater is required for the AM antenna when the passive antenna is configured as an AM2 antenna. (b) For the AM2+ antenna, the antenna gain must satisfy the requirements of Figure 1402. (6) A passive antenna (A) shall satisfy the requirements of Figure 1402; and (b) for the AM2+ antenna, the antenna gain must satisfy the requirements of Figure 1402. (7) For the AM antennas referred to in paragraph (d)(1) of this section, the antenna connection may be a ground connection between the antenna and the ground. (8) For AM1-5 GHz and AM2-5 GHz, the passive antenna shall be connected to a ground connection with a ground link cable connection that is capable of providing the following elements of the performance requirements specified in Table 1702 in accordance with this paragraph (8):

(a) a power supply for receiving the specified p영주출장샵 영주안마ower from an AC source that is capable of supplying the specified power; and (b) a ground connection for transmitting signals from the specified power to an AC source that is capable of transmitting signal